The AG-HPX500 features a 2/3-inch lens mount that accepts interchangeable lenses, HD/SD multi-format compatibility with 50/60-Hz selctability and a variable frame rate function that allows cine-like picture quality, this new camera-recorder has everything professionals need to create high-quality video content. Equipped with four P2card slots, the AG-HPX500 allows extended HD recording time and delivers the high reliability, quick recording starts and IT benefits that distinguish P2 and revolutionize the recording and editing workflow.

CAMERA FEATURES

2/3-inch progressive CCD
2/3-inch bayonet type lens mount
Optical Color Seperation:	Prism System
ND Filter:	4 position (Clear, 1/4, 1/16, 1/64)
Gain Selection:
50i/60i:	0/+3/+6/+9/+12/+18 dB
25p/30p:	0/+3/+6/+9/+12 dB
Variable Frame Rate:
60 Hz mode:	12/18/20/22/24/26/30/32/36/48/60 fps (frame/sec)
50 Hz mode:	12/18/20/23/25/27/30/32/37/48/50 fps (frame/sec)
Sensivity:	F10 (Typical)
Please note: 60Hz is 59.94 Hz, 24P is 23.98 Hz

MEMORY CARD RECORDER

Recording Format:	DVCPRO HD/DVCPRO 50/DVCPRO/DV selectable
Audio Recording Format:	PCM digital recording 48 kHz / 16 bits
	4CH (DVCPRO HD/DVCPRO 50)
	2CH/4CH selectable (DVCPRO/DV)
Recording Time (approx.):	8 min. with one AJ-P2C008HG (DVCPRO HD, 4 CH)
	17 min. with one AJ-P2C016RG (DVCPRO HD, 4CH)
P2card Slot:	4 Slot (4G, 8G, 16G Card)
SD Card Slot:	SD Format standard (MMC not used)
	1 Slot (Camera setup, Reading/Writing)
Recording File:	MXF File
File System:	FAT32

INPUT/OUTPUT SIGNAL

Genlock in:	BNC x 1, 1.0Vp-p, 75?
Component out:	D4 terminal (Component), Y: 1.0Vp-p, 75?, Pb/Pr: 0.7Vp-p, 75?
SDI out:	BNC x 1, 0.8Vp-p, 75?
	(HD:SMPTE292M/296M/299M; SD:SMPTE259M-C/272M-A/ITU-R.BT656-4 Standard)
TC in:	BNC x 1, 05 to 8Vp-p, 10K?
TC out:	BNC x 1, Low impedance, 2.0 ±0.5Vp-p
IEEE 1394:	6 pin, Digital In/Out, based on IEEE 1394 Standard
DC in:	XLR x 1, 4-pin, DC12V (DC11.0 to 17.0V)
DC out:	4-pin, DC12V (DC11.0 to 17.0V), max.1.5 A
Remote:	10 pin
Lens:	12 pin
EVF:	20 pin
USB2.0 (Device):	Type-B, 4-pin (USB ver 2.0)

AUDIO INPUT

MIC in:	XLR x 2 (FRONT1, FRONT2), High impedance, +48V compatible
	MIC: -40/-50/-60 dBu (Switch on Menu)
Audio in:	XLR x 2 (REAR1, REAR2), High impedance
	LINE/MIC/+48V switchable
	LINE: 0 dBu, MIC: -50/-60 dBu (Switch on Menu)
Line in/out:	Pin Jack x 2 (CH1/Ch2), Out: 600?, 316mV
Phones:	Stereo Mini jack (3.5mm diameter)
Internal Speaker:	28mm round shape x 1

MONITOR

3.5" LCD Monitor

210,000 pixels

4:3

STANDARD ACCESSORIES

1.5" LCD B/W viewfinder (4:3 CRT, NTSC/PAL switchable)

Shoulder Strap

P2 card software driver install (CD-ROM)

User's manual

Optional Equipment

SD Memory Card
AJ-VF20WB	2" viewfinder (16:9/4:3)
SHAN-RC700*	Rain cover*
SHAN-TM700	Tripod adaptor
AJ-PCS060G	P2 "Store" portable hard disc unit 60GB
BT-LH2600W	26" HD/SD LCD Monitor
AJ-P2C016	16 GB P2 Card
Anton/Bauer Battery Charger Package HTTP-T230
Anton/Bauer Dionic Battery
Anton/Bauer Battery Charger
AJ-RC10G	Remote Control Unit with 10m remote control cable
AJ-C10050G	Remote Control cable (50m)
FireStore FS-100	Portable DTE Recorder (Focus Enhancements, Inc.)
BT-LH900A	8.4" HD/SD LCD monitor
AJ-HT901G*	Hard Carrying Case
Anton/Bauer Battery
AJ-VF15B	1.5" EVF for 4:3
Fujinon 2/3" lens	Recommend to use the lens which is correspondent to Chromatic Aberration Compensation (CAC) function
Canon 2/3"	Recommend to use the lens which is correspondent to Chromatic Aberration Compensation (CAC) function
AG-MC200G	Microphone
AJ-MC700P	Microphone Kit
BT-LH80W	7.9"Wide HD/SD LCD Monitor - Available in Summer 2007
BT-LH1700W	17"Wide HD/SD LCD monitor
Note	The AJ-RC10G can control only functions supported by the AG-HPX500. It cannot control unsupported keys or dials.
AJ-PCD20	Memory Card Drive (P2 drive)
AJ-HPM100	Memory Card Portable Recorder (P2 mobile)